Passenger vehicles and light trucks

ATOMLOGO2

ATOMIUM Active (Gasoline), for gasoline engines>

Designed for application on gasoline and LPG engines (incl. alusil and nikasil coating) of passenger vehicles and light trucks with mileage less than 50 000 km, (incl. condition after overhaul).

2 Stages of application: 1 can per stage for 1-5 liters engine oil capacity 2 cans per stage for 5-10 liters engine oil capacity

ATOMLOGO2

ATOMIUM Active Gasoline Plus, for gasoline engines

Designed for application on gasoline engines and LPG engines (incl. alusil and nikasil coating) of passenger vehicles and light trucks with mileage MORE than 50 000 km.

3 Stages of application: 1 can per stage for 1-5 liters engine oil capacity 2 cans per stage for 5-10 liters engine oil capacity

ATOMLOGO2

ATOMIUM Active (Diesel) for diesel engines

Designed for application on diesel engines of passenger vehicles and light trucks with mileage less than 50 000 km (including condition after overhaul).

2 Stages of application: 1 can per stage for 1-5 liters engine oil capacity 2 cans per stage for 5-10 liters engine oil capacity

ATOMLOGO2

ATOMIUM Active (Diesel) Plus for diesel engines

Designed for application on diesel engines of passenger vehicles and light trucks with mileage MORE than 50 000 km.

3 Stages of application: 1 can per stage for 1-5 liters engine oil capacity 2 cans per stage for 5-10 liters engine oil capacity

Gearboxes, HPFP, HPS (passenger cars & light trucks)

ATOMLOGO2

ATOMIUM MGSB for mechanical gearbox

Designed for applying on mechanical gear boxes, rear axles, reduction gears of any type and self-locking differentials. The treatment to be made in one stage.

Poured into the gear switch box, there are 2 stages of processing (calculating 30 ml of the lubricant per 1 L of transmission oil per 1 stage).

ATOMLOGO2

ATOMIUM AGSB for automatic gearbox

Designed for application on automatic gear boxes, variators of any type and mechanical gears that use transmission oil Dexron ATF (red oil). The treatment to be made in one stage.

there are 2 stages of processing (40 ml of the lubricant per 1 stage). Add to Dexron ATF (red oil).

ATOMLOGO2

ATOMIUM HPS for power steering

Designed for application on hydraulic power steering of any car that uses transmission oil Dexron ATF (red oil).

ATOMLOGO2

ATOMIUM HPFP for high-pressure fuel pumps

Designed for application on High pressure fuel pumps (HPFP), Common rail systems, Pump injectors of diesel engines with the working volume less than 5 L.

Trucks and commercial vehicles

ATOMLOGO2

ATOMIUM MAX 200 engine capacity from 8,0 L

Additive is designed for application on gasoline engines, LPG engines and diesel engines with cylinder volume from 8 L (8000 cc).

ATOMLOGO2

ATOMIUM MAX 200 HPFP for high-pressure fuel pumps

Additive is designed for application on High pressure fuel pumps (HPFP), Common rail systems, Pump injectors of diesel engines.

ATOMLOGO2

ATOMIUM MAX 200 MGSB for mechanical gearbox

Applied on mechanic gear switch boxes and transfer case gears of the cars and trucks with engine volume from 4 liters.

Poured into the gear switch box, there are 2 stages of processing (30 ml of the lubricant per 1 L of the transmission oil per 1 stage).

ATOMLOGO2

ATOMIUM MAX 200 hydraulic

Additive is designed for application on Hydraulic Drive Systems used in Hydraulic machines, tools and heavy equipment.

Calculated at the rate of 4 -6 ml. of the lubricant per 1L of engine oil.

for more info please visit www.atomium.eu